ENSEARCH
ALL-OVER BOAT CLEANER
Field-tested to the same standard we hold on the water.
Description
Dilute as below and apply with large soft brush (car wash type is ideal). Leave for a few minutes then wash off with clean water. Stubborn marks may require agitating with the brush during application and wash-off. Deep-seated brown waterline marks are best treated with Ensearch Fibreglass Hull Cleaner.
Do not apply in direct sunlight. Do not allow product to dry on surface. For compatibility always try a small test patch on an inconspicuous area. Be careful of painted surfaces, if in doubt check with paint manufacturer. This is a ‘Professional Use’ Product, If in doubt please call +44 (0)7736 434234 for technical advice. Ensearch UK Ltd will not be held responsible for any damage whatsoever caused by inappropriate use.
Dilution guide
-
Mid-season wash-down: 1 part All-Over Boat Cleaner: 50 parts water
-
Pre-season clean/accumulated dirt & grime: 1 part All-Over Boat Cleaner: 20 parts water
-
Stubborn dirt & marks: use product undiluted
-
Guide only, dilution is for fibreglass gelcoat, other surfaces may vary
-
Note: low levels of dilution/undiluted product are likely to remove any existing wax or polish.
Environmental policy
Ensearch is committed to care for the environment by formulating and producing eco-friendly products throughout our business.
MANUFACTURED IN THE UK